CT-480 Aluminum Linear Bar Grille, 1/8″ Bars, 1/4″ Spacing, 0 Degree Deflection
March 6, 2020
TSW Steel Square, ‘Swirl’ Face Diffuser
March 6, 2020
PDS Steel perforated diffuser with face mounted deflectors for drop face ceilings.
OVERVIEW
1-, 2-, 3-, or 4-Way Discharge Pattern
Perforated ceiling diffusers are typically selected to meet architectural demands for air outlets that blend into the ceiling plane. Titus perforated diffusers can be selected for a round pattern to maximize capacity or star pattern to maximize throw.
PDS
Steel perforated diffuser with face-mounted deflectors for drop face ceilings.
Titus perforated ceiling diffusers are designed for both heating and cooling applications. A tight, uniform, horizontal blanket of air protects the ceiling against smudging. The discharge pattern is easily adjusted by unlatching and dropping the perforated face, then rotating the pattern controllers.
Enquiry about PDS Steel perforated diffuser with face mounted deflectors for drop face ceilings.
Enter the security code shown above
Description
FEATURES AND BENEFITS
- Designed for both heating and cooling applications
- A tight, uniform, horizontal blanket of air protects the ceiling against smudging
- Discharge pattern can be adjusted to vertical as well as to one-, two-, three- or four-way horizontal
PAS / PAR / PDS / PDR
- Titus perforated ceiling diffusers are designed for both heating and cooling applications
- Excellent performance in variable air volume systems
- A tight, uniform, horizontal blanket of air protects the ceiling against smudging
- Return models have the same face and border construction as the supply models, for harmonious appearance in the room
- Discharge pattern (supply models) can be adjusted to vertical as well as to 1-, 2-, 3- or 4-way horizontal. It can be adjusted before or after installation.
- The discharge pattern is easily adjusted by unlatching and dropping the perforated face, then rotating the pattern controllers
- Dropping the perforated face also gives access to the optional damper
ADDITIONAL FEATURES
- The perforated face has 3/16″ diameter holes on ¼” staggered centers
- The Inlet collar (neck) has ample depth for easy duct connection
- Material is heavy gauge steel back pan; steel or aluminum perforated face according to the model selected
- Optional factory-installed R-6 foil-backed insulation available for 24 x 24″ full-face models, neck sizes 6-16, borders 1, 2, 3 and 4
Reviews (0)
Reviews
There are no reviews yet.