SD Card Module
March 12, 2020
Flexfiller Midi
March 12, 2020
Flexfiller IP66
Compact and totally enclosed digital pressurization units with an electronic pressure transducer and a user-friendly microprocessor for use on the sealed system in order to provide a minimum system pressure requirement.
The Flexfiller IP66 is a wall-mounted, flow rate (up to 12 l/min) top-up pressurisation unit with a 4-litre internal break tank. Ideal for Industrial, commercial, or large domestic applications. Available in single or twin pump configuration.
Enquiry about Flexfiller IP66
Enter the security code shown above
Description
Application:
Commercial, Industrial, and Residential.
System Volume (Guide): < 50,000 litres.
Product Features:
- For system volumes up to 50,000 liters.
- Fluid Protection Category 5 (AB Weir Overflow).
- AB air gap to EN13077:2008.
- WRAS approved break tank and float valve.
- IP66 rated cabinet.
- Internal thermostat & heater.
- Neon power indicator.
- System fill mode.
- Onscreen Service Reminder – 12 Months.
- Electric pump, 230V 50Hz 1ph.
- Colour: White (RAL 9003).
- MODBUS RTU Communication Protocol.
- Password protected.
- Sequential programming menu.
- Pressure setting in 0.1 bar increments.
- Pump pulse option.
- Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
- Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interruption.
- Volt free contacts: Common Alarm (N/C), High-Pressure Alarm (N/O), Low-Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
Operating Conditions:
- The system temperature range at the point of connection: 5 ºC / 85 ºC.
- Ambient temperature range: -10 ºC / 40 ºC.
- Pressure rating: PN 10.
- Relative humidity 95% non-condensing.Noise Rating Data: < 75 dBA.
Certifications and Standards Applied:
- PED 2014/68/EU Sound Engineering Practice.
- IEE – Electrical Safety Guidance.
- EMC 2004/108/EC.BS 7074 Parts 1 to 3.
- Machinery Directive 2006/42/EC.
- Electronic Components have been tested and comply with the EMC Directives.
- EN 61000-6-1: Generic Standards – Immunity standard for industrial environments.
- EN 61000-6-2: Generic Standards – Immunity standard for industrial environments.
- EN 61000-6-3: Generic Standards – Emission standard for residential, commercial, and light industrial environment.
- CE marked components, where applicable.
- WRAS approved the float valve to BS1212.
- IP54 (BS EN60529) rated controller.
The material of Construction:
- Cabinet: Mild steel CR4 Powder Coated.
- Float: WRAS approved.Break Tank: Polypropylene.
- Connection: Brass / Polypropylene.
- Pipework: Braided Flexhose / EPDM / Copper.
- Finish: Powder coated.Valves: Brass / PTFE.
Reviews (0)
Reviews
There are no reviews yet.