Flexfiller Midi
March 12, 2020
AirfixControl
March 17, 2020
Flexfiller Twin System
Compact and totally enclosed digital pressurization units with an electronic pressure transducer and a user-friendly microprocessor for use on the sealed system in order to provide a minimum system pressure requirement.
The Flexfiller Twin System is a floor standing unit, ideal where space restrictions make it beneficial to locate two systems in a single enclosure. The system combines two high flow rates (<18 l/min) top-up pressurization units and two controllers with a single 18-liter break tank.
Application:
- Commercial, Industrial, and Residential.
System Volume (Guide): < 300,000 litres per system.
Enquiry about Flexfiller Twin System
Enter the security code shown above
Description
Product Features:
- For system volumes up to 300,000 liters per system.
- Fluid Protection Category 5 (AB Weir Overflow).
- System fill mode.
- Onscreen Service Reminder – 12 Months.
- Electric pump, 230V 50Hz 1ph.Colour: Black (RAL 9005).
- MODBUS RTU Communication Protocol.
- Password protected.
- Sequential programming menu.
- Pressure setting in 0.1 bar increments.
- Pump pulse option.
- Flood Protection (Pump Runtime Limiter, Excessive Start Alarm).
- Event logging: Alarm activations, Pump Run counter (activations per pump), Cumulative run timer (hours per pump), Electrical interruption.
- Volt free contacts: Common Alarm (N/C), High-Pressure Alarm (N/O), Low-Pressure Alarm (N/O), Sensor Health (N/O), Pump 1 Health (N/O), Pump 2 Health (N/O).
Operating Conditions:
- The system temperature range at the point of connection: 5 ºC / 85 ºC.
- Ambient temperature range: 5 ºC / 40 ºC.
- Pressure rating: PN 10.
- Relative humidity 95% non-condensing.
- Noise Rating Data: < 75 dBA.
Certifications and Standards Applied:
- PED 2014/68/EU Sound Engineering Practice.
- IEEE – Electrical Safety Guidance.
- EMC 2004/108/EC.BS 7074 Parts 1 to 3.
- Machinery Directive 2006/42/EC.Electronic Components have been tested and comply with the EMC Directives.
- EN 61000-6-1: Generic Standards – Immunity standard for industrial environments.
- EN 61000-6-2: Generic Standards – Immunity standard for industrial environments.
- EN 61000-6-3: Generic Standards – Emission standard for residential, commercial and light industrial environment.
- CE marked components, where applicable.
- WRAS approved the float valve to BS1212.
- IP54 (BS EN60529) rated controller.
The material of Construction:
- Cabinet: Mild steel CR4 Powder Coated.
- Float: WRAS approved.Break Tank: Polypropylene.
- Connection: Brass / Polypropylene.
- Pipework: Braided Flexhose / EPDM / Copper.
- Finish: Powder coated.
- Valves: Brass / PTFE.
Reviews (0)
Reviews
There are no reviews yet.